Determination of the cost of design and survey work. PIR estimates

INTRODUCTION

1. GENERAL PROVISIONS

2. METHOD OF CALCULATING THE COST OF WORK

APPLICATION

Determination of the cost of design and survey work. PIR estimates

INTRODUCTION

1. GENERAL PROVISIONS

2. METHOD OF CALCULATING THE COST OF WORK

APPLICATION

Methods for estimating the cost of design work.

Determination of the cost of engineering surveys.

Automation of estimate calculations PIR. PIR program

How to quickly learn how to calculate PIR correctly

Introduction

Methods for estimating the cost of design work.

Determination of the cost of engineering surveys.

Automation of estimate calculations PIR. PIR program

How to quickly learn how to calculate PIR correctly

Introduction

Calculation based on natural indicators of the object (NPO)

Calculation of design and survey work based on construction costs (OCC)

Calculation of the cost of design and survey work based on labor costs

Introduction

1. General Provisions

2. Methodology for calculating the cost of work

I. General provisions

2. Methodology for calculating the cost of work

Application. Table 1. An example of calculating the qualification (participation) coefficient of performers involved in the performance of work (services).

Introduction

1. General Provisions

2. Methodology for calculating the cost of work

Application

Calculation based on natural indicators of the object (NPO)

Calculation of design and survey work based on construction costs (OCC)

Calculation of the cost of design and survey work based on labor costs

Introduction

1. General Provisions

2. Methodology for calculating the cost of work

Application

I. General provisions

2. Methodology for calculating the cost of work

Application. Table 1. An example of calculating the qualification (participation) coefficient of performers involved in the performance of work (services).

Introduction

1. General Provisions

2. Methodology for calculating the cost of work

Application

New articles

Popular articles

Table 2.1.

Table 2.2. Indices of the average monthly salary of direct executors (developers)

Table 1. Example of calculating the qualification (participation) coefficient of performers participating in the performance of work (services)

Table 2.1.

Table 2.2. Indices of the average monthly salary of direct executors (developers)

Table 2.1.

Table 1. Example of calculating the qualification-participation coefficient

Table 2. Example of calculating the base price of work

Table 2.1.

Table 2.2. Indices of the average monthly salary of direct executors (developers)

Table 1. Example of calculating the qualification (participation) coefficient of performers participating in the performance of work (services)

Table 2.1.

Table 2.2. Indices of the average monthly salary of direct executors (developers)

Table 2.1.

Table 1. Example of calculating the qualification-participation coefficient

Table 2. Example of calculating the base price of work

Having practiced in the field of estimating the cost of design and survey work for about 7 years, I have made a huge number of conclusions regarding the complexity and imperfection of the pricing system in this area of activity, I will add, an intellectual and expensive area of commercial activity of design and survey bureaus.

Let me start with the fact that the assessment of the cost of design and survey work (hereinafter referred to in the text) is carried out at a time when there is no project yet, and, perhaps, there is not even a sketch of the future building, structure, linear object, etc. Quite recently I came across an “album” (a sketch of a future sports complex), in which the area, volume, the presence of built-in premises of the facility, the presence of nearby infrastructure, and 3 pictures of the desired sports complex were reported - it was necessary to determine the cost of the design.

Experience suggested that it was necessary, at a minimum, to understand the composition of the designed volumes. At the moment, the document defining the composition and content of project documentation , is . But this resolution contains only the composition of the volumes of the project, as well as the composition of the content of engineering surveys, which in percentage terms can be about 20-25% of the cost of the main design work; the composition and content for the design of external engineering networks is also not clear: water supply, sewerage , electricity supply, gas supply, etc....

I won’t exaggerate, there are answers to these questions (if you ask yourself), it’s worse if we simply miss these volumes.

So, in order to determine the composition and content of engineering surveys, it is enough to refer to the Methodological manual for determining the cost of engineering surveys for the construction of the State Committee for Construction of Russia: Federal State Unitary Enterprise PNIIIS Gosstroy of Russia, 2004, which sets out the composition of the necessary surveys - geology, geodesy, ecology, and also provides a list of documents defining the composition of these surveys, what samples and in what quantities need to be carried out at the study site.

It remains to deal with the design of external engineering networks - the answer is the TECHNICAL SPECIFICATIONS (hereinafter referred to as TOR), in which the customer (sometimes the designer himself) formulated the requirements and list of gas, water, electricity, etc. networks necessary for commissioning, and also the necessary technical conditions for connecting to these networks (determine the distances to the nearest input points or generating facilities).

Stage 1 – initial data, completed!

The 2nd stage, admittedly, is no less difficult - determining the cost of design and survey work!

There are 3 possible methods for calculating the cost of design work and 2 possible methods for calculating the cost of engineering surveys.

The 1st calculation method is based on the natural indicators of the object (hereinafter referred to as NPO) - area, volume, length of linear objects, productivity for generating objects, etc., to which certain basic price indicators correspond in the collections of basic prices. At the moment, this is the most convenient and reliable method for determining the price of design work. About 250 collections of basic prices for most types of work have been developed. SBC are used for the federal budget and municipal budgets of the constituent entities of the Russian Federation. For the Moscow region and the Moscow city budget of the State Unitary Enterprise NIAC "Moscomarchitectures", Moscow Regional Recommendations, abbreviated as MRR, have been developed, which are mandatory when calculating estimates for design and development works when financed from the Moscow City Budget. More details about this calculation method can be found in the Guidelines for determining PIR, approved.

The second and less convenient method of calculation is calculating the cost of design and survey work as a percentage of the cost of construction and installation work, which is not always convenient due to the lack of estimates before design, and it is also not always possible to find an analogue object. There are a number of directories of analogue objects and methods for the aggregated determination of construction costs, for example: construction price standards (NCS) are included in the Federal Register of Estimate Standards; regional construction directory RSS-2014, feasibility study estimate - developed by Mosstroytsen OJSC, etc.

Having determined the cost of construction using any possible method, as a percentage of the cost of construction and installation works , reported in Directories and collections of basic prices, we determine the cost of design and survey work. Again, in more detail in MU 2010 approved by order of the Ministry of Regional Development of December 29, 2009 No. 620.

3rd method - loved by the contractor and unloved by the customer - labor costs (hereinafter referred to as 3p, why 3p is a form for calculating estimates for labor costs, approved under form number 3P). With this method, the actual time of participation of designers in the development of any volume of the project or structural element of the building and other types of work that are not included in reference books and collections of basic prices is determined. The method is convenient for the designer in connection with the determination of the actual time of participation of specialists in the development of the project by expert means; the performer himself decides who and how much time participates in the design. This results in design costs. Read more about this method in the Explanations of Tsentrinvestproekt for 1999.

The main method for determining the price of engineering surveys is calculation based on natural indicators reported in directories and collections of basic prices for 1991 and 2001. At the moment, for research there are only federal reference books of basic prices, which are used for any source of financing, but for Moscow money we must not forget about the city order standard reported in.

The second possible method for determining the cost of research is labor costs. Here everything is similar to labor costs in design, we determine the actual time of participation of specialized specialists, and therefore we get the price.

At this point in time, all of the above methods for calculating design and survey work, as well as the mentioned SBC and MRR are contained and automated in, for your information, the federal SBC directories are included in the system on the basis of a direct agreement with CENTRINVESTproject. The program allows you to use search engines to select the desired price, read the necessary methodological documents, and also upload documentation in any convenient format XLS, PDF, Word... The program allows you to simplify the task by at least 3 times in relation to the usual calculation in Excel, and also removes We have problems with you regarding monitoring the relevance of the collections, because... opposite the reference books there are marks - whether the collection was included in the register of estimate standards or cancelled, and moreover - which reference book was published to replace the canceled one.

For those who found this article interesting and useful, we recommend that you take training on ours! In just a few lessons you will learn methods for calculating design and survey work, learn about the composition and content of design and survey documentation, learn how to work in federal (SBC) and Moscow (MRR) directories, ask questions about the types of work that interest you when preparing estimates, study the leading program for calculating estimates, the PIR System, and also receive a certificate of short-term advanced training in the form established by the state.

THE GOVERNMENT OF MOSCOW

Moscow City Committee on Pricing Policy in Construction
and state examination of projects

METHODOLOGY
calculating the cost of scientific,
normative and methodological, design
and other types of work (services),
carried out with the attraction of funds
budget of the city of Moscow
(based on standardized labor costs)

MRR-3.2.67.02-13

“Methodology for calculating the cost of scientific, normative, methodological, design and other types of work (services) carried out with the involvement of funds from the budget of the city of Moscow (based on standardized labor costs). MRR-3.2.67.02-13" was developed by specialists of the State Budgetary Institution "NIAC" (S.A. Kopbaev, E.A. Igoshin, A.V. Minaeva) based on the state assignment of the Moscow City Committee on pricing policy in construction and state examination of projects.

“Methodology for calculating the cost of scientific, normative, methodological, design and other types of work (services) carried out with the involvement of funds from the budget of the city of Moscow (based on standardized labor costs). MRR-3.2.67.02-13" was approved and put into effect by order of the Moscow City Committee on pricing policy in construction and state examination of projects dated July 4, 2014 No. 60.

The “Methodology” was put into effect to replace Appendix 2 to MRR-3.2.06.07-10.

This “Methodology for calculating the cost of scientific, normative, methodological, design and other types of work (services) carried out using funds from the budget of the city of Moscow (based on standardized labor costs). MRR-3.2.67.02-13" (hereinafter referred to as the "Methodology") is intended to determine the initial (maximum) price of work (services), as well as to determine the cost of contract and subcontract work (services), for which there are no regulatory and methodological documents on pricing .

Such work includes certain types of design work and urban design and territorial planning work, research work, development of normative and methodological documentation, etc.

A distinctive feature of these works is the absence of a functional dependence of the labor intensity of their implementation with natural indicators used in calculating the cost of most types of design work (m, m 2, m 3, pcs., etc.).

When developing the Methodology, the following regulatory and methodological documents were used:

1.1. This “Methodology” is an integral part of the norms and regulations in the design and construction complex of Moscow.

1.2. The main types of work (services), for which base prices are calculated on the basis of standardized labor costs in accordance with this “Methodology,” include:

Design work for which there are no regulatory and methodological documents on pricing in design, or the cost of which, in accordance with the “Collection of basic prices for design work for construction, carried out with the involvement of funds from the budget of the city of Moscow,” is recommended to be determined by standardized labor costs;

Development of urban planning documentation and territorial planning documents, for determining the cost of development of which there are no regulatory and methodological documents;

Development of research and normative-methodological documentation;

Conducting marketing research.

1.3. To calculate the base price, standardized labor costs are accepted for a five-day, two-day-off, 40-hour work week (Articles 91, 100 of the Labor Code of the Russian Federation).

1.4. Basic prices calculated on the basis of the “Methodology” take into account the following expenses:

For remuneration of all participants in the work performed;

Contributions to state social and health insurance;

Depreciation charges for the complete restoration of fixed production assets and expenses for all types of their repairs;

Rent;

Taxes and fees established by law (except VAT);

Profit.

1.5. The following associated costs are not included in the base prices and are subject to compensation by the customer:

Costs for the acquisition of standard documentation for buildings and industrial products intended for the design of facilities;

Travel and transportation costs associated with the design of an object outside the location of the design organization;

Expenses for international and long-distance telephone conversations, international and long-distance postal and telegraph mail related to design;

Expenses for paying bills of approval and examination organizations for work performed in accordance with the established procedure or on behalf of the customer in the event that these services are not included in the list of documents issued to applicants without charging a fee;

Scientific and technical support of objects;

Expenses for payment of services of organizations for translation from foreign and into foreign languages of design and reference and methodological documentation;

Costs for the production of additional copies of design documentation in addition to the mandatory four copies;

Expenses for paying bills of organizations providing data on traffic flows, climatic conditions and background concentrations of pollutants;

Value added tax.

1.6. Basic prices for work are calculated on the basis of this “Methodology” as of 01/01/2000.

1.7. Bringing the base price to the current level is carried out using a conversion factor for the base cost of design work ( TO per) to the current price level, approved in accordance with the established procedure.

1.8. When determining the cost of work on the basis of base prices calculated according to this “Methodology”, coefficients that take into account complicating (simplifying) factors for performing work are not applied.

1.9. Reducing the time frame for completing work relative to the normative ones (if such a requirement is formalized in the prescribed manner) is taken into account by using correction factors, the values of which are given in the “Collection of basic prices for design work for the construction of facilities carried out with the involvement of funds from the budget of the city of Moscow. МРР-3.2.06.08-13", table 4.2.1.

2.1. The cost of performing work is calculated based on base prices. Basic prices are calculated based on standardized labor costs, using the formula:

Average salary as of 01/01/2000; (accepted 9590 rub./month);

R - level of profitability (accepted R = 10 %);

TO h- coefficient taking into account the share of wages in the cost ( TO h accepted 0.4).

2.3. A coefficient that takes into account the level of qualifications (participation) of performers in the development ( TO kv(uch)), calculated by the formula:

AND i- index of average monthly wages of direct performers;

H i- number of performers in groups with the same salary level;

T f i- actual working time of performers with the same salary level.

Taking into account basic values Salary , R And TO h and using the formula, the average monthly unit (one worker) output for the work performed is calculated:

2.4. The standard duration of work is determined by the formula:

Where WITH b- development cost in prices as of 01/01/2000.

Table 2.1

Development cost WITH b(2000), thousand roubles.	T np(months), based on the number of employees H P(persons)
	3 people	5 people	10 people	15 people	20 people	25 people
100,0
200,0
300,0
400,0
500,0
600,0
700,0
800,0	10,1
900,0	11,4
1000,0	12,6

Notes:

1. The values given in the table are not mandatory for calculations, but are intended for a preliminary assessment of the number of participants in the work.

2. With intermediate and missing values of the number of employees ( H P), the duration of work is determined by interpolation and extrapolation methods.

2.5. The cost of performing work at current prices is calculated on the basis of base prices using the formula:

WITH shopping center- cost of work in current prices;

C b(2000)- base price of work at the price level as of 01/01/2000;

TO lane- coefficient for converting the base cost of design work into the current price level. Magnitude TO lane approved in accordance with the established procedure.

Table 2.2

Indices of the average monthly salary of direct executors (developers)

	Job titles	Index of average monthly salary of direct performers
	Head of a workshop, department, department, laboratory	2,00
	Deputy head of a workshop, department, department, laboratory	1,90
	Chief Project Architect (CAP), Chief Project Engineer (CPI), Head of Sector, Leading Researcher	1,85
	Chief specialist, senior researcher	1,80
	Group leader, group leader	1,75
	Researcher	1,50
	Leading specialist, junior researcher	1,00
	Architect (engineer, economist, specialist) category I	0,90
	Architect (engineer, economist, specialist) II category	0,80
	Architect (engineer, economist, specialist) III category	0,75
	Architect (engineer, economist, specialist)	0,70
	Technician	0,65

Table 1

An example of calculating the qualification (participation) coefficient of performers involved in the performance of work (services)

Names of performers' positions	Actual time of the performer's participation in the work, days T f	Planned duration of work, days T P	Number of performers of the same qualification, people. H i	Salary level index for specialists performing the work	Qualification (participation) coefficient of specialists TO kv(uch) Σ(gr. 3: gr. 4 ∙ gr. 5 ∙∙gr. 6) / Σ gr. 5

Head of the workshop					0,150
The chief architect of the project				1,85	0,231
Chief Specialist					1,620
Leading Specialist					1,100
Architect of the 1st category					0,900
Technician				0,65	0,439
Total Profitability, R	Average daily unit output, rub. IN Wed(2000) (gr. 4 ∙ (1 + gr. 6)) / gr. 5	Duration of development, days T P	Number of performers, people. H P	Qualification (participation) coefficient TO kv(uch)	Vase price, rub. C b(2000) (gr. 7 ∙ gr. 8 ∙ gr. 9 ∙ gr. 10)

9590			40 %	10 %	1199	0,555	212942

Cost of work (services) performed in current prices (as of the second quarter of 2014):

WITH TC - Ts b(2000) ∙ TO per - 212942 ∙ 3,238 - 689506.2 rub.,

Where TO per = 3.238 - conversion factor (inflationary change) to the base cost of urban planning and design work in the second quarter of 2014 to prices in 2000 (according to the order of Moskomekspertiza dated January 20, 2014 No. 5).

The government of Moscow
MOSCOW CITY COMMITTEE ON PRICING POLICY IN CONSTRUCTION AND STATE EXAMINATION OF PROJECTS

Chapter 9

Additional and related work

Methodology for calculating the cost of scientific, normative, methodological, design and other types of work (services) based on standardized labor costs

Lost force on January 1, 2019 on the basis
Order of Moskomekspertiza dated December 26, 2018 N MKE-OD/18-74
____________________________________________________________________

Collection 9.1 "Methodology for calculating the cost of scientific, normative-methodological, design and other types of work (services) based on standardized labor costs. MRR-9.1-16" (hereinafter referred to as the Collection) was developed by specialists of the State Autonomous Institution "NIAC" (S.V. Lakhaev, E A. Igoshin, A. V. Minaeva).

The collection was approved and put into effect on January 9, 2017 by order of the Moscow City Committee on pricing policy in construction and state examination of projects dated December 29, 2016 N MKE-OD/16-75.

The collection is an integral part of the Unified Regulatory Framework of the Ministry of Regional Development.

The collection was developed to replace MRR-3.2.67.02-13.

This Collection 9.1 "Methodology for calculating the cost of scientific, normative, methodological, design and other types of work (services) based on standardized labor costs. MRR-9.1-16" (hereinafter referred to as the Methodology) was developed in accordance with the state assignment.

This Methodology is intended for use by government customers, design and other interested organizations when calculating the initial (maximum) prices of contracts and determining the cost of scientific, normative, methodological, design and other types of work (services) carried out with the involvement of funds from the budget of the city of Moscow and for which there are no regulatory and methodological documents on pricing.

When developing the Methodology, the following regulatory and methodological documents were used:

- Civil Code of the Russian Federation;

- Moscow regional recommendations. Chapter 4 "Architectural and construction design. Basic design work" ;

- Collection 1.1 "General guidelines for the application of Moscow regional recommendations. MRR-1.1-16".

1.1. This Methodology is an integral part of the Unified regulatory framework of the MRR.

1.2. When determining the cost of work based on this Methodology, one should also be guided by the provisions of collection 1.1 "General guidelines for the application of Moscow regional recommendations. MRR-1.1-16".

1.3. Bringing the base cost of work determined in accordance with this Methodology to the current price level is carried out by applying a conversion factor (inflationary change), approved in the prescribed manner.

1.4. The main types of work (services), the cost of which is calculated on the basis of standardized labor costs in accordance with this Methodology, include:

- design work and urban planning work for which there are no normative and methodological documents on pricing in design, or the cost of which, in accordance with the “General Guidelines for the Application of Moscow Regional Recommendations. MRR-1.1-16” and other MRR collections, is recommended to be determined by standardized labor costs ;

- development of urban planning documentation and territorial planning documents, for determining the cost of development of which there are no regulatory and methodological documents;

- development of research and normative-methodological documentation;

- conducting marketing research.

1.5. To calculate the base price, standardized labor costs are accepted for a five-day, two-day-off, 40-hour workweek (Articles 91, 100 of the Labor Code of the Russian Federation).

1.6. Basic prices calculated on the basis of the Methodology take into account the costs listed in paragraph 3.3 of MRR-1.1-16.

1.7. Basic prices calculated on the basis of the Methodology do not take into account the associated costs listed in paragraph 3.6 of the MRR-1.1-16.

1.8. When determining the cost of work based on base prices calculated according to this Methodology, coefficients that take into account complicating (simplifying) factors for performing work are not applied.

1.9. Reducing the time frame for completing work relative to the standard (if such a requirement is formalized in the prescribed manner) is taken into account by using correction factors, the values of which are given in Table 4.1 MRR-1.1-16.

1.1. The cost of performing work is calculated based on base prices. Basic prices are calculated based on standardized labor costs, using the formula:

Where

- basic price of work;

- average output;

- planned duration of work;

- number of performers;

- coefficient that takes into account the level of qualification (participation) of performers in the development.

1.2. Average monthly output is calculated using the formula:

Where

- average salary (accepted 9590 rubles/month);

P - level of profitability (accepted P = 10%);

- coefficient taking into account the share of wages in the cost (accepted 0.4).

1.3. The coefficient taking into account the level of qualification (participation) of performers in the development () is calculated using the formula:

Where

- index of average monthly wages of direct performers;

- number of performers in groups with the same salary level;

- actual working time of performers with the same salary level.

Taking into account the basic values of ZP, P and K and using formula 2.2, the average monthly unit (one worker) output for the work performed is calculated:

RUB/month

1.4. The standard duration of work is determined by the formula:

where is the cost of development.

The following table shows the recommended values for = RUR 26,373.

Table 2.1


Development cost	(months), based on the number of employees (persons)
Thousand roubles.

Notes:

1. The values given in the table are not mandatory for calculations, but are intended for a preliminary assessment of the number of participants in the work.

2. With intermediate and missing values of the number of workers (), the values of the duration of work are determined by interpolation and extrapolation methods.

Table 2.2

Indices of the average monthly salary of direct executors (developers)


	Job titles	Index of average monthly salary of direct performers
	Head of a workshop, department, department, laboratory
	Deputy head of a workshop, department, department, laboratory
	Chief Project Architect (CAP), Chief Project Engineer (CPI), Head of Sector, Leading Researcher
	Chief specialist, senior researcher
	Group leader, group leader
	Researcher
	Leading specialist, junior researcher
	Architect (engineer, economist, specialist) category I
	Architect (engineer, economist, specialist) II category
	Architect (engineer, economist, specialist) III category
	Architect (engineer, economist, specialist)

Application

Table 1

An example of calculating the qualification (participation) coefficient of performers involved in the performance of work (services)


Names of performers' positions	Actual time of the performer's participation in the work, days	Planned continuation duration of work, days	Number of performers of the same qualification, people.	Salary level index for specialists - performers of work	Qualification (participation) coefficient of specialists (gr.3: gr.4 x gr.5 x x gr.6) / gr.5

Head of workshop
The chief architect of the project
Chief Specialist

The government of Moscow
MOSCOW CITY COMMITTEE ON PRICING POLICY IN CONSTRUCTION AND STATE EXAMINATION OF PROJECTS

Methodology for calculating the cost of scientific, normative, methodological, design and other types of work (services) carried out with the involvement of funds from the budget of the city of Moscow (based on standardized labor costs)
MRR-3.2.67.02-13

In fact, it became invalid due to the adoption
order of Moskomekspertiza dated December 29, 2016 N MKE-OD/16-75

____________________________________________________________________

"Methodology for calculating the cost of scientific, normative, methodological, design and other types of work (services) carried out with the involvement of funds from the budget of the city of Moscow (based on standardized labor costs). MRR-3.2.67.02-13" was developed by specialists of the State Budgetary Institution "NIAC" (S. A. Kopbaev, E. A. Igoshin, A. V. Minaeva) on the basis of the state assignment of the Moscow City Committee on pricing policy in construction and state examination of projects.

"Methodology for calculating the cost of scientific, normative, methodological, design and other types of work (services) carried out using funds from the budget of the city of Moscow (based on standardized labor costs). MRR-3.2.67.02-13" was approved and put into effect by order of the Moscow City Committee on pricing policy in construction and state examination of projects dated 07/04/2014 N 60.

The “Methodology” was put into effect to replace Appendix 2 to MRR-3.2.06.07-10.

This "Methodology for calculating the cost of scientific, normative-methodological, design and other types of work (services) carried out using funds from the budget of the city of Moscow (based on standardized labor costs). MRR-3.2.67.02-13" (hereinafter "Methodology") is intended to determine the initial (maximum) price of work (services), as well as to determine the cost of contract and subcontract work (services), for which there are no regulatory and methodological documents on pricing.

Such work includes certain types of design work and urban design and territorial planning work, research work, development of normative and methodological documentation, etc.

A distinctive feature of these works is the absence of a functional dependence of the labor intensity of their implementation with natural indicators used in calculating the cost of most types of design work (m, m, m, pcs., etc.).

When developing the Methodology, the following normative and methodological documents were used:

- Civil Code of the Russian Federation;

- "Collection of basic prices for design work for construction, carried out with the involvement of funds from the budget of the city of Moscow. MRR-3.2.06.07-10".

1.1. This “Methodology” is an integral part of the norms and regulations in the design and construction complex of Moscow.

1.2. The main types of work (services), for which base prices are calculated on the basis of standardized labor costs in accordance with this “Methodology,” include:

- design work for which there are no normative and methodological documents on pricing in design, or the cost of which, in accordance with the “Collection of basic prices for design work for construction, carried out using funds from the budget of the city of Moscow”, is recommended to be determined by standardized labor costs;

- development of urban planning documentation and territorial planning documents, for determining the cost of development of which there are no regulatory and methodological documents;

- development of research and normative-methodological documentation;

- conducting marketing research.

1.3. To calculate the base price, standardized labor costs are accepted for a five-day, two-day-off, 40-hour workweek (Articles 91, 100 of the Labor Code of the Russian Federation).

1.4. Basic prices calculated on the basis of the “Methodology” take into account the following costs:

- remuneration of all participants in the work performed;

- maintenance of the administrative and managerial apparatus;

- contributions to state social and health insurance;

- depreciation charges for the complete restoration of fixed production assets and expenses for all types of their repairs;

- rent;

- taxes and fees established by law (except VAT);

- profit.

1.5. The following associated costs are not included in the base prices and are subject to compensation by the customer:

- costs for the acquisition of standard documentation for buildings and industrial products provided for the design of facilities;

- travel and transportation costs associated with the design of an object outside the location of the design organization;

- expenses for international and long-distance telephone conversations, international and long-distance postal and telegraph mail related to design;

- expenses for paying bills of approval and examination organizations for work performed in accordance with the established procedure or on behalf of the customer in the event that these services are not included in the list of documents issued to applicants without charging a fee;

- scientific and technical support of objects;

- costs of paying for the services of organizations for translation from and into a foreign language of design and reference and methodological documentation;

- costs for the production of additional copies of project documentation in addition to the mandatory four copies;

- expenses for paying bills of organizations providing data on traffic flows, climatic conditions and background concentrations of pollutants;

- value added tax.

1.6. Basic foams of work are calculated on the basis of this “Methodology” as of 01/01/2000.

1.7. Bringing the base price to the current level is carried out using a conversion factor for the base cost of design work () to the current price level, approved in the prescribed manner.

1.8. When determining the cost of work on the basis of base prices calculated according to this “Methodology”, coefficients that take into account complicating (simplifying) factors for performing work are not applied.

1.9. Reducing the time frame for completing work relative to the normative ones (if such a requirement is formalized in the prescribed manner) is taken into account by using correction factors, the values of which are given in the “Collection of basic prices for design work for the construction of facilities carried out with the involvement of funds from the budget of the city of Moscow. MRR-3.2.06.08-13 ", table 4.2.1.

2.1. The cost of performing work is calculated based on base prices. Basic prices are calculated based on standardized labor costs, using the formula:

Where

- base price of work in prices of 01/01/2000;

- average output at the price level as of 01/01/2000;

- planned duration of work;

- number of performers;

- coefficient that takes into account the level of qualification (participation) of performers in the development.

2.2. Average monthly output is calculated using the formula:

Where

- average salary as of 01/01/2000 (accepted 9590 rubles/month);

P - level of profitability (accepted P = 10%);

- coefficient taking into account the share of wages in the cost (accepted 0.4).

2.3. The coefficient taking into account the level of qualification (participation) of performers in the development () is calculated using the formula:

Where

- index of average monthly wages of direct performers;

- number of performers in groups with the same salary level;

- actual working time of performers with the same salary level.

Taking into account the basic values of salary, P and using formula 2.2, the average monthly unit (one worker) output for the work performed is calculated:

2.4. The standard duration of work is determined by the formula:

where is the cost of development in prices as of 01/01/2000.

The following table shows the recommended values for = RUR 26,373.

Table 2.1


Development cost	(months), based on the number of employees (persons)
Thousand roubles.

Notes:

1. The values given in the table are not mandatory for calculations, but are intended for a preliminary assessment of the number of participants in the work.

2. With intermediate and missing values of the number of workers (), the values of the duration of work are determined by interpolation and extrapolation methods.

2.5. The cost of performing work at current prices is calculated on the basis of base prices using the formula:

Where

- cost of work in current prices;

- base price of work at the price level as of 01/01/2000;

- coefficient for converting the base cost of design work into the current price level. The value is approved in accordance with the established procedure.

Table 2.2


	Job titles	Index of average monthly salary of direct performers
	Head of a workshop, department, department, laboratory
	Deputy head of a workshop, department, department, laboratory
	Chief Project Architect (CAP), Chief Project Engineer (CPI), Head of Sector, Leading Researcher
	Chief specialist, senior researcher
	Group leader, group leader
	Researcher
	Leading specialist, junior researcher
	Architect (engineer, economist, specialist) category I
	Architect (engineer, economist, specialist) II category
	Architect (engineer, economist, specialist) III category
	Architect (engineer, economist, specialist)
	Technician

Application

Table 1

The government of Moscow

MOSCOW CITY COMMITTEE ON PRICING POLICY IN CONSTRUCTION AND STATE EXAMINATION OF PROJECTS

ADDITIONAL AND RELATED WORK

Methodology for calculating the cost of design, scientific, normative and methodological, and other types of work (services) based on standardized labor costs

МРР-9.1.02-18

This Collection 9.1 "Methodology for calculating the cost of design, scientific, normative, methodological and other types of work (services) based on standardized labor costs. MRR-9.1.02-18" (hereinafter referred to as the Methodology) was developed in accordance with the state assignment.

This Methodology is intended for use by government customers, design and other interested organizations when calculating the initial (maximum) prices of contracts and determining the cost of design, scientific, normative, methodological and other types of work (services) carried out with the involvement of funds from the budget of the city of Moscow and for which there are no regulatory and methodological documents on pricing.

When developing the Methodology, the following regulatory and methodological documents were used:

- Civil Code of the Russian Federation;

- Collection 1.1 "General guidelines for the application of Moscow regional recommendations. MRR-1.1-16".

1.1. This Methodology is an integral part of the Unified regulatory framework of the MRR.

1.3. Bringing the base cost of work determined in accordance with this Methodology to the current price level is carried out by applying a conversion factor (inflationary change), approved in the prescribed manner.

1.4. The main types of work (services), the cost of which is calculated on the basis of standardized labor costs in accordance with this Methodology, include:

Design work and urban planning work for which there are no regulatory and methodological documents on pricing in design, or the cost of which, in accordance with the “General Guidelines for the Application of Moscow Regional Recommendations. MRR-1.1-16” and other MRR collections, is recommended to be determined by standardized labor costs;

Development of urban planning documentation and territorial planning documents, for determining the cost of development of which there are no regulatory and methodological documents;

Development of research and normative-methodological documentation;

Conducting marketing research.

1.5. To calculate the base price, standardized labor costs are accepted for a five-day, two-day-off, 40-hour workweek (Articles 91, 100 of the Labor Code of the Russian Federation).

1.6. Basic prices calculated on the basis of the Methodology take into account the costs listed in paragraph 3.3 of MRR-1.1-16.

1.7. Basic prices calculated on the basis of the Methodology do not take into account the following associated costs:

Travel and transportation costs associated with performing work outside the location of the performing organization;

Expenses for payment of services of organizations for translation from foreign and into foreign languages of design and reference and methodological documentation;

Expenses for international and long-distance telephone conversations, as well as international and long-distance postal and telegraphic items associated with the performance of work;

Expenses for paying invoices of organizations approving and conducting examinations for work performed in accordance with the established procedure or on behalf of the customer in the event that these services are not included in the list of documents issued to applicants without charging a fee;

Costs of producing, at the customer’s request, additional copies of the developed documentation in excess of the required number of copies;

Expenses for paying bills for work in archives, museums, libraries, BTI, etc.;

Costs of paying bills to organizations providing data on traffic flows, climatic conditions and background concentrations of pollutants.

1.8. When determining the cost of work based on base prices calculated according to this Methodology, coefficients that take into account complicating (simplifying) factors for performing work are not applied.

1.9. Reducing the time frame for completing work relative to the standard (if such a requirement is formalized in the prescribed manner) is taken into account by using correction factors, the values of which are given in Table 4.1 MRR-1.1-16.

2.1. The cost of completing the work is calculated based on the base price. The base price of work is calculated based on standardized labor costs using the formula:

Basic price of work (thousand rubles);

Basic average daily unit output of one direct contractor (thousand rubles);

The total duration of the work according to the calendar plan (days);

Total number of direct executors (persons);

A coefficient that takes into account the degree of participation of performers of various qualifications in development (qualification-participation coefficient).

2.2. Basic average daily unit output is calculated using the formula:

Basic average daily wage (accepted in accordance with clause 2.3);

P - level of profitability (accepted P = 10%);

A coefficient that takes into account the share of wages in the cost (assumed = 0.4).

2.3. The basic average daily wage is taken on the basis of the basic standard average monthly wage in the amount of 12,406 rubles/month. and the average number of working days in a month in the amount of 22 days and amounts to 564 rubles/day.

2.4. Taking into account the values of the basic average daily wage, profitability and the coefficient taking into account the share of wages in the cost specified in paragraphs 2.2 and 2.3, and using formula 2.2, the basic average daily unit output is calculated:

2.5. The coefficient taking into account the degree of participation of performers of various qualifications in the development () is calculated using the formula:

Qualification index of direct performers (accepted according to table 2.1);

Number of performers with the same qualifications (persons);

Actual working time of performers of the same qualifications (days).

Table 2.1


	Job titles	Qualification index of direct performers
	Head of a workshop, department, department, laboratory
	Integrated Chief Project Architect (CHP), Integrated Chief Project Engineer (CPI) - Project Manager, Chief Researcher
	Deputy head of a workshop, department, department, laboratory
	Chief Project Architect (CAP), Chief Project Engineer (CPI), Head of Sector, Leading Researcher
	Chief specialist, senior researcher
	Group leader, group leader
	Leading specialist (architect, engineer, economist), researcher
	Architect (engineer, economist, specialist) category I, junior researcher
	Architect (engineer, economist, specialist) II category
	Architect (engineer, economist, specialist) III category
	Architect (engineer, economist, specialist)

Table 1


Names of performers' positions	time of participation of the performer bodies at work, days	Total duration performance work worries, days	performance of equal qualifications cation, pers.	Qualification index cation directly executive	Qualification-participation rate (gr3:gr4xgr5xgr6)/

Head of workshop
The chief architect of the project
Chief Specialist
Leading Specialist


Total

table 2

Basic medium

monthly norm-

executive salary

Names of performers' positions

Fact-
time of participation of the performer
body at work,
days

Planned continuation
duration of work, days

Number of executives
same qualified
cation, pers.

Specialist salary level index
sheets - perform-
work tels

Qualification (participation) coefficient of specialists

(gr.3:gr.4xgr.5xgr.6) /
/gr.5

Head of workshop

The chief architect of the project