Award figurines, cups, made of glass and acrylic. Award figurines, cups, glass and acrylic Figurines based on photographs

3D modeling technology allows you to create mini figurines of people to order, and it is not necessary to go through the 3D scanning procedure; it is possible to produce figurines from photographs. 3D figures of a person made from a photo exactly repeat the original, everything is drawn down to the smallest detail: physique, face while maintaining proportions, eye color, facial expressions, all the features of appearance, hairstyle, tattoos, clothes, accessories.

In our work we use professional high-precision equipment and modern CJP 3D printing technology. Our modelers have an artistic education, talent in the field of 3D modeling, extensive work experience, and take a responsible and creative approach to each order, so 3D sculptures from photographs turn out to be as similar as possible to real people.

To create human figurines from photos, a polymer composite material is used, the base of which is gypsum. Ready-made 3D figures of people from the 3DKLON studio do not cause allergic reactions and do not contain toxic substances. Thanks to printing technology and materials (exclusively original paints are used), mini sculptures do not fade over time, remain just as bright, and the color lasts for a long time. It is not recommended to wet the figurines or place them in direct sunlight.

What photographs are needed to make 3D figures?

The ideal option is to provide good quality photographs of the model with high resolution and from different angles. You will need a photo of the head, body, separately close-up of the face, a photograph with pose and clothing, which will be captured in a 3D figurine.

It is advisable to adhere to the following recommendations when taking photographs:

take photos in a room where there is enough light, it is uniform;

the distance to a person should be no more than 2 m;

take several photos, moving in a circle every 45°, you will get about 8 photos from different sides;

do not wear shiny accessories;

preference should be given to bright, colored clothes with various patterns and pictures;

do not do too big hairstyles, lush styling;

add to the image an object that will help characterize your hobbies, for example, a soccer ball, a guitar, a camera, a hunting rifle.

It often happens that 3D figures are ordered from a photo when the person is not around, there is no opportunity to take a special photo of him, following all the rules, then we try to help the client and make figurines from any photographs that are saved in the home archive or downloaded from social networks. The more such photos there are, the better and easier it will be for our artists to model the specified person.

When placing an order to make a sculpture from a photograph, pay attention to the pedestal on which it will stand. It should match the style of the figure and fit organically into the interior.

The main stages of creating a 3D figure.

The procedure for creating 3D figures from a photo looks like this:

Fill out an application, and you discuss all the details of the order with our employee.

Providing the necessary photographs for modeling a 3D human figure.

Creation of a 3D model using special computer programs and coordination with the customer. If necessary, make changes to the created model.

Printing the final agreed version of the figurine on a 3D printer. After this, a special treatment is carried out, a fixative and a protective layer of wax are applied.

Delivery of the finished product to the addressee.

How to order a 3D figurine?

You can apply for the production of a 3D figure from a photo to order in 3 ways:

Calls from any region of the Russian Federation are free by phone number listed on the website;

when visiting our offices in Moscow, St. Petersburg, where you can see what finished portrait figurines made from photographs look like;

on the official website of the 3DKLON studio.

Also in the office or on the website you can issue a gift certificate for creating a 3D character from a photo, in this case the owner of the certificate will choose the desired image, appearance, pose. In St. Petersburg, a certificate for a 3D figurine is delivered by a courier service at the client’s request. The courier will deliver the gift free of charge to the specified address.

The price of a statue based on a photograph depends on its size, the level of complexity of the work, the amount of information provided and the quality of the photographs. It takes from several working days to 2 weeks to create one 3D human figurine.

The production of custom figurines is carried out in our offices in Moscow and St. Petersburg. Delivery is carried out throughout the Russian Federation, near and far abroad countries.

If you have lost a figurine or it has been damaged, you can order a copy. We will print a new figurine on a 3D printer using an existing saved 3D model.

A 3D figurine of a person from a photo is an original, unexpected gift, order it from us, and you can surprise and delight your family, friends or colleagues.

Modern 3D technologies to implement any idea

Figurines are a huge trend when creating unique souvenirs, characters from your favorite films or games, creating figurines of yourself or loved ones, exhibition and gift presentations at events. Collector's editions that are no longer produced can be recreated again and even given a new or different look at your discretion. A gift made by yourself also fits this definition; you can model this product, and then a specialist will calculate it and the program code will implement it in an ideal form.

Many companies use the services of making custom figurines; we will tell you about some of them that have switched from traditional methods of producing such products to 3D printing. For a long time, the Runet Prize made its samples from metal; the cost of the final product was tens of thousands of rubles, which is a colossal amount for a unique product. Now this manufacturing option has moved towards 3D printing and for the last couple of years the production of figurines has been carried out on 3D technological equipment, which produces any shape of products; they can be attached to each other due to the design or diffusion soldering of surfaces. This is how modern and innovative companies solve standard problems in the production of figurines and souvenirs for companies and exhibition events.

Figurines made of metals: bronze, silver, aluminum

Nowadays, you won’t surprise anyone with things that can be purchased in a simple store - our company exists precisely to perform this task. We make unique figurines and souvenirs to order, they are of a unique shape and structure, special in color scheme, elegant in the final form. 3D printing technologies make it possible to grow hollow figurines or souvenirs, the external texture of which is completely perforated or have unique holes or structure, which allows you to create any customer’s ideas.

Printing figurines makes it easy to create a high-quality analogue of figurines cast from metal, but the cost of this product will be tens of times lower. The weight of the figurine can be calculated, cavities can be created to increase the mass of the product after printing using metal shavings or denser plastic. Treatment of the plastic surface is possible both mechanically and non-contactly (acetone bath), which allows you to obtain a smooth glossy surface of the future product

Services for making figurines are in demand today and we offer only the best offers for the design of souvenirs and figurines. This is primarily due to the competence of specialists and skills acquired over many years of working with additive technologies and modern equipment, and designers and 3D artists working with computer graphics will prepare an optimal, beautiful and multifunctional model that can be used both in the production of a 3D model, as well as for visualization or virtual reality.

Cost and prices for figurines

The 3Dguru team carries out diverse projects and most of them are unique. We will try to give a general understanding of the cost of our services. Based on our previous orders, you can understand the approximate cost of 3D printing your projects. We help select references and concepts if necessary. The cost is calculated from many criteria, we will present some of them:

volume of material used
time in print
model complexity
availability of materials

3D copies of people, 3D selfies, 3D figurines, Photography 3.0. There are many names, but the essence is the same. Or almost alone.
The idea captivates with its overwhelming wow factor.

Are you still taking photos?
And we already scan people and print their exact copies in color.

Hundreds of companies have turned their attention to this niche and entered the competition for consumer attention.

On the Internet you can find an educational course “How to make money by printing three-dimensional figures”
The course costs 4,600 rubles, and its author makes money not from 3D printing, but from selling the course.

I'll save you money by summarizing it in five points:
1. Buy a course
1. Make a website
2. Hire a freelance designer (as an option on 3Dtoday)
3. Find a printer
4. Receive money, send orders.

The course assumes printing on an fdm printer, but in principle, it seems to me, this will work for other printing technologies.

That's why there are so many sites on the Internet that offer 3D figures from photographs. The guys do not have their own equipment, but simply merge the consumer and the performer and receive their profit. Well done to those who can do this.

But there are more serious players - those who have invested in their own equipment.
They invite you to scan in their office or can do an on-site scan; they have a full-time 3D modeler who will finalize and comb the model.
It is possible that they order printing from a third party, but here at least the consumer has a guarantee of the quality and similarity of the resulting model.

And there are companies that are seriously developing this business and investing not only in equipment and the full production cycle, but also in marketing.
Here I would highlight two companies as an example: BeIn3d And MiniMe3D.

MiniMe3d
How to introduce a new, expensive service to the Moscow market?

The guys approached the process creatively and on a grand scale. In the short time the project was launched, they scanned and printed the finalists of the show “The Voice,” singer Glukoza, MMA fighters, famous bloggers and journalists.
MiniMe3d received a lot of attention from the press and television. They managed not only to attract attention to the new original gift, but also to create an aura of elitism specifically for the figurines from MiniMe3d.

The apotheosis of the project’s development was the world’s first show of the Haute Сouture collection in the format of 3D sculptures.

Bein3D
The company also took the path of scanning and printing stars.

In a short time they found their copies
Timati, VIA gra, Anita Tsoi, Timur Rodriguez, Stas Kostyushkin and his wife Yulia, Chile, Bigbeta

The next step in popularizing 3D figures was the opening of a scanning point in the Vegas shopping center in Moscow.
Speaking at the conference 3D Print Expo in St. Petersburg, co-owner of the company Alexey Kolachev said that the service has steady demand and the business is growing steadily.
Interestingly, orders that require additional 3D modeling bring in more money: lose weight on me and attach angel wings, or I want my head on Superman’s body.
Great hopes are placed on further work with 3D content obtained as a result of scanning.

Does it make sense to open a 3D figure printing business now?
Yes it does, if you can bring something new to the table. Especially in regions where this fashion trend has not yet reached.

If you decide to make money by 3D printing various figures, then after looking around the market a little, you can definitely tell where you need to be careful so as not to do “like everyone else”! For example, you need to approach the creation of a website with your soul: more original things, fewer photographs of works with the Chinese, and you definitely should not use this photo:

If people always hiccupped when they were remembered, then this guy would probably hiccup throughout his life, because he is on almost every site! No, to attract the client's attention you need to stand out.

Equipment selection

The next thing you need to do for an action figure business is to decide on the equipment. A small part of the market today works with FDM printers, and products are hand-painted. A large number of organizations use various gypsum printers from 3D Systems. These machines differ from each other mainly only in the volume of the printing area. Accordingly, each company has its own available sizes of figures.

Printers using other color printing technologies can also work in this business: CJP, 3DP, LOM, SDL, but for various reasons this equipment is still in little demand.
But in vain! After all, for example, figures obtained by the SDL lamination method not only have excellent quality of color detail, but are also very durable, which cannot be said about fragile plaster.

A few words about business in 3D figures.

1. The resulting figures are not as easy to break as plaster ones. It’s a shame when, bought for 12,000 rubles, a figurine accidentally falls to the floor and a loved one’s arm falls off. The photo shows a beer opener printed on a printer. Mcor. I'm not suggesting you open a beer with your 3D Selfies. But this definitely serves as an example of the durability of the resulting figures.

2. HD color reproduction. Printers Mcor Technologies- the only printers that fully comply with the International Lighting Consortium standard ( ICC), ensuring that accurate color reproduction is maintained from the creation phase to final printing.

3. The cheapest consumables you can think of. Long term printer Mcor more profitable and will bring more profit. Material costs are only 10% of the cost of materials used in other printing technologies.

You can also add that the resulting products are absolutely environmentally friendly, and post-processing takes a few minutes and even a child can handle it, but it seems to me that the three reasons given above are enough to consider this printer as the basis for a business printing 3D figures.

Scanners.

Another type of equipment that is needed for a 3D figure business is 3D scanners. Among them you need to pay attention to:

Professional hand-held optical scanners that provide not only high-quality fixation of objects, but also high scanning speed. The disadvantage is handheld operation and, therefore, a long scanning time (10-30 minutes).
The so-called “booths”, in which a large number (40-50 pieces) of digital cameras are located in a circle, providing very fast shooting. Such installations are just gaining popularity and are distributed, as a rule, through franchising, but due to the large number of cameras they are very expensive.

Separately, it is necessary to say about portal scanning from the company Texel Graphics.

They use a unique patented technology that allows them to scan from 17 to 40 people in 1 hour! At the same time, the high quality of the color model and the inexpensive cost of the necessary equipment are maintained. It is also interesting that scanners mounted on the frame can be changed if more advanced models become available for sale.
There was a post on 3Dtoday about scanning a person on Texel Portal with further printing on Mcor Iris.

What else can you offer the client?

The “gentleman’s kit” of any self-respecting company that makes money from printing 3D figures should include the following additional services:

Modeling from a photograph, picture, drawing, sketch.
On-site scanning.
Print with a variety of materials (the more, the better).
Gift certificates for 3D selfies.
Delivery of figures (preferably free in your region).

Also, some companies that are seriously involved in making money from 3D figures sell franchises, which can make it easier for a new entrepreneur to start.

But what should those who cannot or do not want to buy a franchise choose?

Sales ads should stand out with unusual words, and a successful 3D figure business should stand out with unique equipment and related capabilities. Mcor printers can provide strong, not fragile, as well as beautiful and detailed colored figures, and quick scanning - Texel Portal. Both the first and second machines are unique in their kind and have many advantages over analogues. With the support of such units, you can cope with any task.

In conclusion, I will give some statistics on the 3D figurines market in Russia. Apparently, it is just beginning to emerge.

Making miniature figures based on a computer game. These heroes became a pleasant gift for the player. Materials: metal.

We made a figurine on a sports theme (athletics). A monumental sculpture made by hand by our craftsmen became a worthy gift! Materials: metal, marble.

Production of figurines based on individual customer designs. Materials: metal, marble.

Making a cup for a writer who has published a new book. The concept of the form was the hand in which the stylized eye is located. Materials: plastic, marble, hand-painted art.

Making award figurines in the shape of an intricate star for presentation in the prestigious category “best hotel of the year”. Materials: metal, marble.

Production of miniature figurines with hand-made artistic inscriptions, for collectors. Manual modeling. Materials: metal.

Manufacturing of desk writing sets for an oil company. Director, oilman and oil preventer as a pencil holder. Materials: Metal, plastic, polystone.

Production of figurines in the shape of a jewelry salon logo for employees and partners of the company. Materials: chrome, crystal, marble.

Making a figurine for the hood in the shape of a prancing stallion. Materials: chromed metal.

Making a figurine in the form of a younger woman, with a portrait resemblance. An unforgettable wedding gift! Materials: metal, marble.

Making a garden sculpture in the form of a gnome with a portrait likeness. During manual modeling, all the client’s wishes regarding details and attributes of the character were taken into account. Materials: metal.

Making figurines of a cat with a sausage. Materials: metal, marble.

Business card holders in the shape of a lathe were made for a flange manufacturer. The company presented them to clients and partners as a reminder of cooperation. Materials: metal, marble.

Production of souvenir products for the largest energy company in Russia. Materials: metal, wood.

Making figurines in the shape of a logo from a seal for the Sakhalin Library. Materials: metal, marble.

Making figurines in the shape of the main building of Moscow State University for students and teachers of the university. Materials: metal.

Production of busts of Hippocrates by order of honey. institutions. Materials: metal, marble.

Making a spaceship from a computer game. Materials: metal, marble.

Making award figurines in the form of a logo for presentation at an event dedicated to entrepreneurs. Materials: metal, marble.

Making award figurines for a well-known oil company. One of the virtues is imprinted on each finger, and the logo is in the center of the palm. Handmade.

Making miniature figurines of Chapaev, in the image of a monument from Cheboksary. Materials: metal, marble.

Making a bust as a gift to the father from the children. The bust is made in the image of an ancient Greek senator. Materials: metal, marble.

Making a warrior figurine according to an individual design. Materials: metal, stone (coil).

Making a large figurine for a European bank. The key figure of the sculpture is a hummingbird hovering in flight over a flower. Materials: metal, marble.

Production of an edition of figurines for a company that manufactures equipment for divers. Materials: metal, marble.

Making a miniature sculpture with a portrait likeness based on the client’s photo. Materials: metal, marble.

We turn your ideas into masterpieces!

You have a unique opportunity to create your own masterpiece, made in metal or other material.The products are made by our craftsmen, adhering to all the subtleties of traditional and modern technologies. We also use the latest technologies when developing layouts and prototypes to achieve maximum compliance with your expectations.

Regardless of whether this product is a single copy or an edition, each finished copy is handmade and one of a kind!

We will translate any of your ideas into exclusive products at affordable prices.

Almost any problem is solved by us after agreeing on all the details!

HOW TO PLACE AN ORDER

In order to create your own masterpiece and place an order, or simply calculate the cost, you just need to send to our email - [email protected] or on WhatsApp pictures (photos, sketches) or any other information. This is the only way we can prepare a detailed proposaland calculate the cost.

Main stages of production:

Sketch or graphic layout (free).
Making a master model (prototype)from sculptural clay or 3D modeling.Already at this stage you will be able to see your future product in volume; subsequently the metal will repeat all the details. We regularly send photo reports about the modeling progress by mail or WhatsApp. This way you can control the process, adjust elements or approve the result. This ensures that the finished product will fully meet your expectations!
Preparation of production equipment (molding, dies, waxes, etc.).
Product manufacturing, post-processing.
Decorative coatings (patination, chrome plating, etc., at the request of the client).

Materials used: metal, plastic, plaster.

The following can be used as pedestals: stone, glass, wood,

You can immediately choose the color of your future product.
Or we will prepare several samples for you to choose from.

One of the methods of color decoration of products can be galvanizing (gold plating, chrome plating, bronze plating, copper plating).

PRICE

Unlike most other studios, where work begins only after 50 or 100% prepayment, payment in our studio is made in stages. We start work with a minimum advance payment (1500 - 2500 rubles)

In order to create your own masterpiece and place an order, or simply calculate the cost, you just need to send to our mail - [email protected] or on WhatsApp pictures (photos, sketches) or any other information. This is the only way we can prepare a detailed proposal and calculate the exact cost.

The most important thing in the manufacture of a new product is the preparation of all production equipment. This is the most responsible and time-consuming process. The cost directly depends on the size, configuration and detail of the product. Based on these parameters, the method of modeling, molding, casting, etc. is selected

The price range can vary from 5000 rub. up to 35,000 rub. for the first copy and all production equipment (paid only 1 time).

And from 200 R. before 8000 rub. per product in circulation, depending on weight, quantity, etc.

In the future, you will always be able to re-order any quantity of your products from 1 piece.

Our prices are 40-60% lower than the market average

That’s why it’s so important to immediately send detailed information and all your wishes for an accurate calculation when making a request.

But in any case, you can be sure that we will provide the lowest prices.

DEADLINES

The timing depends on the complexity of the project and the speed of approval of the layout with the prototype. On average, it takes from 8 to 20 days to prepare production equipment and the first finished sample. Subsequent copies in circulation, from 3 days, depending on quantity.

Typical application...

Despite the fact that in addition to metal, we can also use plastics and gypsum as raw materials, the main preference is given to the first.

Why are souvenirs made of metal valued and more impressive than those made of other materials?

Firstly, this is a compelling argument. Metal products are always pleasant to hold in your hands and there is no doubt that they are more than just a “toy”.

Secondly, our technologies allow us to capture even the smallest details in metal.

What to give as a prize, what to give as a souvenir? Award cups, glass figurines with engraving of a memorable inscription - a wonderful and unusual award, present, gift. The Moscow company "Taija" produces such products from glass, acrylic, and crystal.

Award products: cups and figurines made of glass for engraving

The range of glass award products is so extensive that you can easily choose glass gift cups that suit the occasion for awarding winners of competitions and competitions, as well as award figurines for clients and sponsors, symbols of recognition of the talents and merits of employees.

The value and significance of such awards, their elegant appearance is achieved due to absolute transparency, the shine of perfectly polished surfaces, multiple refraction of light in the edges, the play of color shades, and heavy weight. Glass figurines and cups for awards are in particular demand; Moscow is a metropolis where hundreds of sports cups are awarded every day, but even more cups are required for competitions and corporate celebrations.

The best option for such cases– custom-made glass cups, you can buy products with brand marks and logos. All of them will be of high quality and beautifully packaged. You can also choose and buy award prizes and cups from a catalog of ready-made forms.

The latest technologies for working with glass make it possible to turn any idea into reality - the production of prizes involves the design of the product without restrictions and the possibility of introducing into it elements of corporate style and nuances that reflect the professionalism, achievements and personal characteristics of the people to whom they are addressed.

Our website also contains a catalog of cups, prizes and awards ready for your text and logo to be applied.

Making glass figurines for awards

The Taija company is one of the well-known manufacturing companies supplying souvenir and gift products to the Moscow market:

ready-made prizes and awards made of glass;
ready-made acrylic prizes and awards;
custom glass figurines;
souvenirs made of crystal and acrylic;
tombstones;
gift frames and plaques;
three-dimensional photo and laser engraving inside the glass.

The cost of cups is from 4500 RUR/piece.

According to a long-established tradition, award statuettes are awarded to winners of cinematographic and music competitions - a custom Oscar statuette is intended for individuals whose activities are related to art. Experienced craftsmen and artists will make not only this, but also other figurines to order according to individual designs, and each of them will become a real masterpiece without flaws.

All gift products and custom souvenir figurines find their buyer. They decorate offices and apartments, but are more often used as gifts for festive events and give their owners joy, mood, and a feeling of satisfaction.

Taija company offers production of award figurines to order both according to previously developed standard sketches, and exclusively taking into account the specific wishes of the client. In both cases, you will be satisfied with the result. Professionals who know how to work with glass will not disappoint you!

Each of the masters is a unique specialist. Gifts of this level are usually presented as a sign of respect to VIP clients, show business stars, honored figures of science, art, politics, and famous entrepreneurs. The cost depends on the size.